DATE：19-09-23

　　The reverse blow bag dust collector used in the foundry is a device where the dust containing gas enters the ash hopper through the inlet pipe, is purified by the filter bag inside the box, and then discharged to the outlet pipe through the main valve pla...

DATE：19-09-18

　　Polyester needle punched felt dust removal bag is available in stock. The needle punched felt has functions and is used in industries such as flour, chemical, coal powder, etc. where there is a risk of explosion in the event of electrostatic discharge....

DATE：19-09-15

　　The filter cartridge dust collector has good breathability and is not easily contaminated with dust; Bag filter is suitable for the treatment of dry dust....

DATE：19-09-12

　　During the operation of a standalone dust collector, it is necessary to check whether the pulse cleaning system is blowing properly. If it is not working properly, it is important to inspect the pulse valve diaphragm and solenoid valve for any malfunction...

DATE：19-09-05

　　When the vehicle containing gas enters the dust collector through the air inlet, it first touches the inclined plate and baffle in the middle of the air inlet and outlet, and the airflow turns to flow into the ash hopper. At the same time, the airflow spe...

DATE：19-09-02

　　The UV photo oxygen purifier uses ultraviolet light beam to irradiate the waste gas and decompose it into industrial waste gas. After the industrial waste gas is input into the purification equipment through exhaust equipment, the purification equipment u...